| High pressure cleaning machine is to produce high-pressure water washing the surface of economy and environmental protection power device is used to clean the machine.
Daily maintenance of high pressure cleaning machine:
1, when operating, shall do personal protection: wear goggles, masks, gloves, avoid contact with the nozzle. 2, check before use in the water filtering port, nozzle, see filter is damaged, clean and with or without debris blocking, nozzle hole is blocked; to flush debris impurity of high pressure cleaning machine and tube; in addition to avoid water containing sand pressure regulating valve wear.
3, often view the liquid and electric connector and the hose is damaged.
4, the gun when not in use, should make the trigger is in the locking state
5, timely replacement of the nozzle, as far as possible the use of minimum pressure to work, to extend the service life of the nozzle and the high-pressure hose.
6, disconnect the hose connection before, must first release the pressure inside the washing machine. Check the hose joint in situ to lock the front, do not start the equipment. The use of the net tube in the water.
7, switch on the supply of water, water spray gun, do not start the equipment. Then, the cleaning nozzle is connected to the spray gun rod.
8, high pressure cleaning machine to be someone special supervision. Release the trigger, avoid long time operation in bypass mode. Bypass mode the pump running after a long time, the high temperature circulating water will shorten the service life of the pump or damage.
9, fuel deposits can make fuel lines, fuel filter and carburetor damage, often remove storage tank fuel sediment to extend the service life and performance of engine.
10, oil tank, no moisture and impurity.
11, after the operation, remove the rubber hose; shut off supply system; the release of pressure in the hose and hose; flushing filter, prevent residues resulting from corrosion; and cut off the connection wire spark plug, to ensure that the engine will not start.
12, high pressure cleaning machine is not put in low temperature environment, prevent freezing; usually pay attention to the maintenance of high pressure cleaning machine, avoid premature wear or corrosion, put it in good condition. |
